Posts Tagged ‘Saloon’
Dinky Toys – 1948-54 Morris Oxford Saloon (#40G or #159)
Image by The Brucer
The Morris Oxford Dinky Toy was produced by Meccano Ltd. (Liverpool, UK) between 1950 and 1960. For the last 4 years of this production run (1956-60), the Oxford was released only in a two-tone color scheme. Thus, the particular single-colored car shown in this photo had to have been produced between 1950 and 1956.
The "40" series of Dinkys — ultimately consisting of eight British saloon (sedan) cars — was the first completely new series introduced by Meccano after production resumed following the end of WWII. This diecast Morris Oxford toy (originally numbered #40G) was presumably the seventh in this series. It was re-numbered as #159 in 1953-54.
Since there is no number stamped on the baseplate of this car, it is unknown whether it was produced before or after this numbering change. However, it is believed that the particular toy shown in this photo was purchased in Llanelli, Wales, between 1950 and 1953 for a young man who obviously took very good care of his Dinkys. Thus, it is quite possible that the toy in the photo predates the numbering change and is technically #40G.
The Oxford was a line of British cars manufactured by the Morris Motor Company between 1913 and 1971. (Actually, Morris Motor Company disappeared as a separate entity in 1952 when it was merged into British Motor Corp., but the Morris Oxford vehicle continued beyond that time.) During this 58-year production run, the Oxford went through ten design generations. The car represented by this model is the fifth generation of Oxford, manufactured between 1948 and 1954 (consistent with the fact that Meccano introduced this toy in 1950).
This car had a 1.5L side-valve straight-4 engine capable of producing 40 hp. Also referred to as the Oxford MO, this car was also sold with a 2-door estate ("station") wagon body.
Dinky Toys – 1947-51 Standard Vanguard Saloon (#040E, later #153)
Image by The Brucer
The Standard Vanguard Dinky Toy was produced by Meccano Ltd. (Liverpool, UK) between 1948 and 1960. For the first two years of this production run (1948-50), this diecast car was cast with the open rear wheel arches (fender wells) seen in the model here, exposing all of the rear tire. Over the subsequent 10 years (1950-60), the rear fender wells were enclosed (so that only the bottoms of the rear tires were visible). Since the toy pictured here has the open rear wheel arches, it was clearly produced between 1948 and 1950.
The "40" series of Dinkys — ultimately consisting of eight British saloon (sedan) cars — was the first completely new series introduced by Meccano after production resumed following the end of WWII. The Standard Vanguard toy (originally numbered #40E) was the third to be released in this series, and was re-numbered as #153 in 1954. Since the model pictured here was produced in 1950 or earlier, it predates the number change and is technically #40E.
The Vanguard was a line of cars produced by the Standard Motor Company of the UK. It was the first new car line introduced by Standard following the end of WWII. The Vanguard line was manufactured between 1947 and 1963, going through five generations during this 16-year production run. The diecast model shown in this photo represents the first generation of the Vanguard, referred to as the "Phase I", produced between 1947 and 1953.
During the last two years of Phase I production (1952-53), some modest modifications were made to the body design, including revisions to the appearance of the front grille. (Vanguards produced during 1952-53 are referred to as "Phase IA".) The toy shown here has the earlier (pre-1952) grille, and thus represents Vanguards manufactured between 1947 and 1951.
Phase I Vanguards had a 2.1L 4-cylinder inline engine capable of accelerating the car to a top speed of almost 80 mph. In addition to this saloon (sedan) body style, the Phase I was also produced as an estate wagon (station wagon) and, in Australia, as a utility vehicle.